Manage cookies
Cookie Settings
Cookies necessary for the correct operation of the site are always enabled.
Other cookies are configurable.
Other cookies are configurable.
Request Product Information
Interested in learning more about this product or need a custom solution? Please fill out the form below, and our team will get back to you promptly.
DIN 41612/IEC 60603-2 Type C Connectors
The DIN 41612 connector has been widely accepted as a standard for a variety of interconnection applications in the telecommunications and data markets worldwide. The most widely known use of DIN 41612 connectors is in the VME bus system. 96 pin DIN connectors with three rows(a, b, c) of contacts on 0.100"(2.54mm) square grid are available in wire-wrap or solder tail type terminations.
Request Product Information
Interested in learning more about this product or need a custom solution? Please fill out the form below, and our team will get back to you promptly.
Test Voltage:
Contact Resistance:
Insulator Resistance:
Temperature Range:
Insertion Force:
Insertion Cycles:
Specifications : DIN 41612, Class 2
1000 VAC
30 m Ohms max @ 100 mA DC
1000M Ohms min @ 500 VDC
-55°C to + 125°C
<90 < 20 Lbs
400
Glass-Filled Polycarbonate or polyesther sulphone
Copper Alloy
0.000010” gold over .000050” nickel
Ni/Gold 0.000010”
2.5A at 20°C, 1A at 70°C
300 VAC
Insulating Material:
Glass-Filled Polycarbonate or polyesther sulphone
Contact Material:
Copper Alloy
Contact Plating:
0.000010” gold over .000050” nickel
Contact Tail:
Ni/Gold 0.000010”
Current Rating:
2.5A at 20°C, 1A at 70°C
Operating Voltage:
300 VAC
Test Voltage:
1000 VAC
Contact Resistance:
30 m Ohms max @ 100 mA DC
Insulator Resistance:
1000M Ohms min @ 500 VDC
Temperature Range:
-55°C to + 125°C
Insertion Force:
<90 < 20 Lbs
Insertion Cycles:
400
Insulating Material:
Contact Material:
Contact Plating:
Contact Tail:
Current Rating:
Operating Voltage:
RE96FABG Specifications
Standard VME Bus Signals J1 Switched Pins
a 21-22
IACK IN - IACK OUT
b 4-5
BG 0 IN - BG 0 OUT
b 6-7
BG1 IN - BG 0 OUT
b 8-9
BG 2 IN - BG 2 OUT
b 10-11
BG 3 IN BG 3 OUT
For automatic daisy chaining of VME and VXI backplanes. Eliminates the need for manual jumpering. Pin entry acts like a switch which is activated. Switches open when male connector is inserted. No other moving parts required. Same MTBF as other types. Requires special installation tooling.
