VECTORBORD® CIRCBORDTM.... PART NO. : 45P80-2
Description :
4.5" x 8.08", Hole Dia.: 0.042", Grid: 0.100" x 0.100"
Pad-Per-Hole 2 Sides
Top / Bottom row on 0.200" pitch with no plating. 
Isolated 0.085” square pads around each hole
Ground plane are identical on both sides and holes are plated thru
Circuit Pattern :
Pad-Per-Hole 2 Sides , Holes plated thru
Contacts :
N/A
16 Pin DIP Capacity :
80
Hole Diameter :
0.042" { 1.0668 mm }
Grid : 0.100" x 0.100" { 2.54mm X 2.54mm }
Dimension { H, W, T } :
4.5" x 8.08" x 0.062"
Material :
CEM-1
Wire-Wrap Terminals :
T44, T46, T49, T68
Solder Terminals :
T42-1
Wire-Wrap Socket Pins :
R32
NEMA Grade : CEM-1
UL Flammability Class :
94V - 0
 
email us your requirements : inquire@vectorelect.com
11115 Vanowen St., North Hollywood, CA 91605, USA
Tel.: ( 818 ) 985 8208, ( 800 ) 423 5659; Fax : ( 818 ) 985 7708
Circbord®, Vectorbord® and VectorPak® are registered trademarks of Vector Electronics & Technology, Inc.
CompactPCI® is a registered trademark of PCIMG. © 2001 Vector Electronics & Technology, Inc. - All Rights Reserved